What dryer do I need in my compressed air system?Member News
Dryers play an important role in providing clean, dry air. The initial investment can result in savings by avoiding costly downtime due to contamination or moisture damage.
Water exists in air as solid, liquid and gas. So, it is inevitable that in a compressor moisture creation is going to happen. The problem is when this goes untreated as it can cause damage to the compressed air system, as well as potential contamination of the end product.
To avoid unnecessary breakdowns and expensive repairs, it’s best to be proactive. The compressed air needs to be dry, clean and suitable for your application.
There are many types of dryer available. Selecting the right dryer is dependent by the required pressure of the dew-point. Once the air quality is determined, different technologies are available to choose between.
Refrigerated air dryers cool the compressed air to 3° Celsius. This causes condensation of the water vapour into liquid water. Using an inbuilt water separator, the liquid gets removed. The dew-point is dictated by its ability to cool the air to the desired dew-point temperature, and then the efficiency of the liquid removal separator. This is a suitable option for applications which don’t need a critical dew-point.
There are 3 common types of refrigeration dryers:
- Direct Expansion Refrigeration Dryers. This is the most common and stable type of refrigeration dryer. But as the dryer is constantly running, it can be the costliest to run.
- Thermal Mass Refrigeration Dryers. Thermal mass dryers have a large mass, usually a water tank or sand, which gets cooled down by the refrigeration circuit. The heat exchange with the compressed air then takes place between the air circuit and the thermal mass. Once the thermal mass cools down, the refrigeration compressor can be turned off to save energy.
- Variable Speed Refrigeration Dryer. This type of dryer uses invertor technology to vary the speed of the refrigeration compressor. It aims to match the cooling requirements of the dryer to the water vapour loading of the incoming compressed air. This can be more energy efficient than a direct expansion dryer. Yet the cost and complexity means they’re often only suitable for larger compressed air flows.
Refrigerated air dryers tend to be used in industrial and manufacturing facilities.
Discover other types of dryers including membrane, desiccant and integrated over on our blog: https://www.directair.co.uk/news/what-dryer-do-i-need-in-my-compressed-air-system/